Why Your Swim Spa Cover Stinks!

Hey, no offense, but your swim spa cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture leaks in and ends up being trapped in between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is ideal for mold and mildew and other forms of foul-smelling things.
If moisture has penetrated further into the cling wrap foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover truly hard to get rid of, and not as efficient at keeping the heat in the spa. Time for a better kind of swim spa cover.

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or worn areas, torn seams. A spa cover that loses it’s arched roof line, to keep water draining pipes off properly, will eventually begin to puddle water, which is most likely time to buy a brand-new swim spa cover! A spa cover with threadbare spots in the vinyl is likewise problem, and although you can fend off the inevitable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A much better cover can withstand longer periods, however it’s a good habit to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to get away do so, but do not remove delicate foam panels unless definitely needed.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, however it won’t stop moisture very well. Even the best foam filled covers with vacuum-wrapped and heat welded seam are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine solution is a swim spa cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not kept regularly with sanitizer and filtering, or is not shocked frequently enough, germs and algae can take advantage of a hospitable environment to grow. Low pH, high chlorine or high ozone levels can also weaken the underside of your spa cover. Because the cover is so close to the spa, it takes in the chemistry of the spa. Tidy, clear and hygienic water is the very best environment to prevent smelly spa covers. (Sorry but this is just BS) The reality is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it constantly looks terrific, and is protected from the elements. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover. But it will help your spa dealer pay their costs.

Your Choices

Repair Your Hot Tub Cover!
• Remove to Safe Location: This first step might seem apparent, however you require a great place to allow the cover to sit undisturbed from animals, wild animals, and winds. It needs to be a warm location if possible, or a dry indoor place with low humidity can likewise be utilized.
• Deodorize & Disinfect: You might not have to do both, it’s best to be as mild as possible. Do not use family cleaning products on your spa cover, unusual chemicals can end up in your spa water. Gently tidy all outside surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, due to the fact that the panels might end up being damaged throughout elimination or cleansing. But if you figure out that there is something slimy within, you can normally unzip and remove the panel for a cleansing inside and out.

How frequently does your spa dealer expect you to do all this? If your swim spa is secured from a lot of sun and rain, twice annually. If it’s exposed it should be 3-4 times each year. Let that sink in a minute.

Better Choice
The easiest cure for a stinky swim spa cover is to simply purchase a different type of swim spa cover A stinky swim spa cover simply indicates that your cover is handling moisture, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers rather will prevent offering the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *